Mobile Car Valeting Tips for All Car Lovers

A lot of car owners like seeing their cars looking clean and shiny at all times. However, what many fail to understand is that this can only be accomplished by regular and proper cleaning. A well maintained car will certainly serve its owner for a very long time while a badly maintained one will serve for a little time before it’s declared not road-worthy. It doesn’t matter if one is getting their car cleaned at home or at the workplace, if the cleaning task is completed well, then the final result is going to be great. Here are some Mobile Car Valeting guidelines to aid car owners make the best car cleaning choices.

Cleaning the car interior

Before you begin cleaning the car, make sure that you clear away any personal objects, any car toys, all litter and any empty ash containers. Make an inspection of your vehicle in order to tell the amount of cleaning work and the time needed to carry out the cleaning job.

After that, methodically vacuum the carpets and seats and get rid of any waste that could be in the boot area. After vacuuming, the seats will need some valeting also. Spray the car seats with an upholstery or carpet cleaner and then use a scrubbing brush or sponge to make sure that the cleaner gets absorbed into the upholstery.

A water removing machine will be required to take away all the filthy water and if water located in places where it’s hard to access, simply use a micro fibre cloth. For tough stains, locate spot removers which are available on the marketplace.

Engine cleaning

Motor cleaning requires a lot of care. Avoid the electric machinery to avoid causing high priced harms on the car. Use a degreaser and a strong cleaning agent for great results. Spray or employ a paint brush to apply the degreaser on the most vulnerable parts, spray a traffic film remover over the motor and let it soak into the engine oil and grease. Lastly, rinse off the traffic film remover and the dirt will come off too.

Wash off the engine and keep it running to make the drying process faster. Lastly, finish by using an engine lacquer after the engine has cooled down. You may also use a lubricating penetrating oil for the perfect finish.

Washing the car body

Before the body washing begins, clean the boot shuts and the doors by using a paint brush or a mop. Use a metal wheel cleaner if your car bears alloy wheels and particularly if they’re covered in brake dust or lots of dirt. Next spray the whole vehicle with a traffic film remover preferably, the non-caustic one to allow trouble-free loosening of the dirt. After that simply hand-wash the car by using a cleaning agent. To finish, give the auto with a final rinse using your power washer and after that dry it off using a micro fibre cloth.

Mobile Car Valeting is vital and to ensure that a vehicle gets the most excellent service, the above ideas should be kept in mind.

Article Source: http://EzineArticles.com/9478859

How to Inspect Your Vehicle for a Road Trip

Taking a road trip can be an unforgettable experience, but failing to perform a proper vehicle inspection before leaving can quickly turn what should have been a pleasurable experience into an unmitigated disaster. Here is how to prevent that happening to you.

Light the way

If you don’t often drive at night, you may not have noticed that your headlights are not as bright as they used to be. Any vehicle inspection should always include a check on the condition of the head light lenses, since the lenses become clouded and pitted over time. If your headlight lenses are in a less than perfect condition replace them, and have the focus adjusted to make sure you can see what’s ahead of at all times.

Keep the engine cool

As with head lights, a vehicle inspection must include a proper inspection of the engine cooling system. Cooling system problems are the second biggest cause of road side breakdowns, so make sure that the coolant contains fresh anti-freeze, that the coolant level is up to the mark, and that there are no fluid leaks anywhere in the cooling system. Repair all leaks well before departure to give you enough time to confirm that repairs had been successful.

Service now, rather than later

Schedule a multi-point vehicle inspection before you leave. This type of vehicle inspection can uncover multitude of defects, or issues that you may not have been aware of, and if you have the vehicle inspection done early enough, you can get all faults repaired in good time. Choose a vehicle inspection plan that includes checks on the following as a minimum;

  • suspension rubbers/bushings
  • condition of the shock absorbers
  • all hoses
  • all drive belts
  • wipers and windshield washer
  • battery/charging system
  • brakes- including the parking brake

If your vehicle is nearly due for and oil change, you may as well have it done during the vehicle inspection. There is no harm in changing the oil and oil filter a few hundred miles early; moreover, you will have the peace of mind that comes with knowing that your engine is lubricated with fresh oil.

Check the electronics

Not all fault conditions will trigger a warning light on the first failure, which makes it very important that the vehicle inspection includes a thorough diagnostic check, since some fault conditions only become apparent after several fault cycles. In these cases, the fault may be stored as a pending code, which means that the fault can become active at any time. Be aware that some pending trouble codes can immobilize, or seriously affect the drivability of a vehicle when they become active, so schedule a diagnostic check-up for your vehicle to make sure that this does not happen to you.

Check the rubber

Of course, no vehicle inspection can be complete without a thorough inspection of the tires, including the spare tire. Just checking the outside of the tires is not good enough; have the wheels removed from the car to properly inspect the inside sidewalls for signs of damage like cuts, bulging, or tread separation on the shoulders.

Also, be sure to check the tread depth, but make sure that the tread is evenly worn over the entire width of all the tires. Uneven tire wear is a sure sign that something is out of alignment, bent, worn, or broken. Replace all tires that are not in perfect condition, and rotate the tires to make sure that all tires share the load equally.

Service the transmission

Your transmission may be working fine, but bear in mind that your vehicle will be a lot heavier on the road trip that it normally is just driving to work and back. Many transmissions develop issues when the load suddenly changes, so your vehicle inspection MUST include a transmission check and/or service, and especially if you are going to be towing a boat or trailer. However, do NOT ask for a transmission flush- many manufacturers prohibit flushing because the process has the potential to cause more problems than it is supposed to solve.

Be prepared

As a final item during your vehicle inspection, make sure that you have some emergency supplies such as the following:

  • spare headlight bulbs
  • spare bulbs for other exterior lights
  • spare fuses
  • some basic tools
  • jack, and lug wrench
  • first aid kit
  • reflective vest (to make you visible) if you need to stop at night
  • one or two blankets
  • flashlight and spare batteries
  • bottled water and snacks
  • contact details for your dealer and insurance company.

Being prepared can mean the difference between an enjoyable, trouble-free experience and an expensive nightmare that you will never forget. So spend some time and money on a proper vehicle inspection to ensure that you arrive at your destination safely, and that you make it back home in one piece.

At Prestige Auto Tech we are a group of professionals who share a common goal: Customer Satisfaction. We pride ourselves in that we strive to be the best in what we do and expect nothing less.

Our ASE Certified Technicians are trained by ASE and have several years of dealership experience. Whoever will be assigned to your vehicle will treat your vehicle as his/her own. Our diagnostics are precise and reliable. Prestige Auto Tech is obsessed with using the latest technology for faster and better diagnosis and repairs.

Article Source: http://EzineArticles.com/9486902

What You Need To Know About Speed Bumps

Speed bumps are important as they help you to slow down thus preventing you from making an accident. While they are important, they can destroy your car if you don’t tackle them properly.

How bumps can destroy your car

Speed bumps can destroy different parts of your car. The most affected areas are shocks. These are units that absorb road imperfections. While the units are designed to take the pressure, they have their limit. If you hit bumps at high speeds you can cause them to bend in many different ways thus forcing you to buy new ones.

Bumps can also destroy your steering where they can break the steering rack mounts, throw the wheels out of alignment or even cause leaks in the power steering. Car experts have also shown that bumps can also damage your car tires. Tires are designed to touch the ground using only the flat surface. When you don’t tackle the bumps properly you force the sides of the tires to scrape the ground thus damaging them.

Guide on how to properly tackle bumps

The key to avoiding damaging your car is slowing down as you come across a bump. When you slow down you allow your vehicle to have full suspension travel. This not only prevents your car from getting damaged, it also prevents the jarring feeling.

In addition to slowing down, you also need to be cautious of how you approach the bump. The best way of going about it is approaching it at an angle. You should maneuver one wheel to the side first and then approach the bump at an angle. When you get over the bump, slightly turn the wheel the other direction so that you can go over the bump diagonally. This prevents the underside of the vehicle from getting damaged.

Regardless of how careful you are, it’s common to be caught by surprise where you unexpectedly come across a speed bump. When you find yourself in this scenario you should first reduce your speed by slamming on the brakes. To be on the safe side brake to the extent that you are almost stopping and then right before you get to the bump, take off your foot from the brake and let the vehicle gently traverse the bump.

Conclusion

This is what you need to know about speed bumps and how to tackle them. To avoid damaging your car always be keen on the road.

Article Source: http://EzineArticles.com/9464477

Spick and Span for Your Car’s Engine

download-6Most people operate with the general understanding that they need to get their car washed regularly in order to keep the exterior looking nice. Not only that, but regular car washes help maintain your car’s paint job. Now, if the outside of your car looks great, so should the inside. As much as it may look brand new, a dirty engine can make your car run like an antique. Never fear! You can actually clean your own car’s engine, as long as you don’t mind getting a little dirty. It really isn’t as difficult as it may seem…

First Things First

You can’t just jump in and hose down your engine. That could be quite dangerous, in fact (think exposed wires). First, you will need to clear out as much of the debris as possible. Thing like leaves and twigs can get stuck in the grill, hood (especially around the seams), and vents. An air compressor is ideal to use as it will just blow away the debris, but it’s not something in most people’s garages. No air compressor? No worries! A small brush will do.

Remember what we said about hosing down your engine being dangerous? Well, here’s why… sensors, exposed wiring, distributor, spark plug openings. These cannot be exposed to water without some kind of protection. Your engine is more or less waterproof already (think rain), but wrapping the sensors and such in plastic will ensure it.

Next Up…

This is a simple one… start your engine and let it run for about 10 minutes. The accumulated grease and oil stuck on the engine will loosen up, and degreasers work much better with a warm engine. Speaking of which…

Getting rid of the gunk built up in your engine requires a degreasing product. While petroleum based degreasers are efficient, they can also degrade rubber hoses and seals. You should get something with a gentler touch, something water or even citrus-based. It’s best to apply a degreaser from the bottom up. Otherwise, it can drip down on you as you work. Please take care as the degreaser can remove the wax from your fenders. Spray carefully, and hose down your fenders, grill, and hood afterward.

How Bad is It?

Now, if your engine is basically clean, just let the degreaser sit for 3-5 minutes. If there is a lot of build up in your engine, you may need to take a parts brush to break up the gunk. A little car washing solution can help. Actually, if I’m being totally honest here, Dawn (as in dishwash soap) works pretty darn well. It is a degreaser itself, so it can help you get those heavily soiled spots loosened up. Just don’t use too much. Your car’s engine will turn into a bubble bath when you hose it down.

Last, but not Least…

Hose that puppy down! There is no need to use a high pressure hose as that can knock things loose. A regular garden hose will do, with light to moderate water pressure. After hosing down your engine, you can let it dry on its own for a bit, but make sure to wipe off the remaining moisture with a microfiber towel. A warm or hot engine will dry itself relatively quickly, but it will spot (kind of like what happens to the exterior when the sprinklers come on and you let it air dry). Don’t forget your before and after pictures…

Article Source: http://EzineArticles.com/9511015

Two Tips For Choosing a Car Finance Broker

When you want to buy a car it is soon quite obvious that you need to find money to do so. There are many channels you can investigate in this regard, but most people turn to car finance brokers as an easy and efficient way to get the money required for this large purchase. But choosing a car finance broker is not always easy, and the process can seem a little overwhelming at first. In this article we hope to provide you with two key tips that should help you sort the wheat from the chaff, and find a car finance broker that will bring you high quality finance at a good price. Most importantly, the car finance experience should be pleasant and hassle-free.

EXPERIENCE?

One of the most important aspects of this process is experience. You should be able to find the details of the car finance broker online, and ascertain their level of experience. Look at their website and see if you feel confident after viewing it. Your instincts are important here. If you have looked at their site and don’t feel better about working with them after doing so, the chances are they are not the right car finance brokers for you.

The website should have the obvious on it, as in clear contact details and so on. It would be preferable if the site also had some fresh content on there too. If they have been able to update their blog recently, this is usually a good sign that they are proactive, and reaching out to a loyal audience.

Most importantly, you should be looking for testimonials or recommendations on the site. If this is happening in a big way, it shows that the broker has some kind of integrity. It also shows that they are good at what they do, and this is exactly what you are looking for in a broker. Take your time to look over the website for the broker. It makes a big difference.

PROFESSIONAL ACCREDITATION

You are also looking for accreditations. You need to know that they have the relevant qualifications and endorsements from professional bodies. This is very important, because the broker is part of a process that involves borrowing. If the integrity is not there through appropriate accreditation, then there is no confidence. If you don’t see plenty of evidence of a professional level of achievement and accreditation, then there really is no reason to proceed with the broker.

The best way to approach this process is to ask yourself some serious questions about your ideal broker. If you are looking for a broker, you need to know that you can trust them. Break down what that trust means in your head, and see if the broker is anywhere near meeting that level of trust. If they are not, remember that this is your money they are going to be dealing with, and ask yourself whether it is a good idea to be placing your trust in them.

New Look Loans is a professional car finance broker situated in Hull, East Yorkshire. We arrange car credit, motorbike finance, road-legal quad bike finance, van finance and caravan finance. We specialise in customers who have previously struggled gaining credit or those who may have a poor credit history. You can choose to deal with any reputable motor dealer in your local area or, alternatively, we can recommend a reputable motor dealer to you, from our approved dealer network. Simply choose the vehicle you would like, and then come to us so that we can find you a fantastic finance option. with affordable monthly repayments, tailored to your circumstances!

Article Source: http://EzineArticles.com/9512359